In Action

No items found.

Our Testing Process Simplified

Our testing team isn't trying to make the machine work, it's trying to make the machine fail. We assess the durability of every machine to ensure your machine will last with any operator under any condition.

Phase 1

A series of short tests of every separate function of the machine to find obvious errors while running only the specific parts, and is completed when each function of the machine has run approximately 10 seconds.

Phase 2

A series of tests, operating the machine as a whole interactive system, again with only the specified parts. It is completed when each function of the machine has been running for approximately 10 seconds.

Phase 3

A test of each specified set of parts, with every function working and the machine operating as a complete, interactive system. This phase is considered complete when the machine has run satisfactorily for 30 consecutive minutes unless a different time frame is specified.

Common Questions

What makes you confident in achieving a significantly higher output rate for the machine?

Given our extensive experience, it's highly probable that we've encountered comparable challenges in various projects, even if we haven't constructed the exact machine. By leveraging our collective expertise, we can effectively address challenges of similar complexity. Our focus is on minimizing the risk associated with the portion that's entirely new, and we aim to devise a clear strategy for its execution.

When is the best time to engage Haumiller?

The sooner the better. With no cost obligation to you, we appreciate being part of the process to control cost and create a long lasting partnership.

Do you take any project?

While we do consider budget constraints, our commitment lies in selecting projects that can sustain our services over the long term, enabling us to dedicate ample time and resources to your project. We have a track record of successfully overcoming challenges, and if we choose to engage with your project, you can have full confidence in our ability to deliver.

When can I expect a response to my request for service / info?

The majority of inquiries regarding machine performance can typically be addressed and resolved via phone support, thanks to our proficient support team and comprehensive documentation.

Who will install my equipment? 

The original tester of your machine will be designated for your project's installation. The original tester possesses the most in-depth familiarity with that specific equipment.